CBSE Class 12 Chemistry – MCQ and Online Tests – Unit 15 – Polymers
Every year CBSE conducts board exams for 12th standard. These exams are very competitive to all the students. So our website provides online tests for all the 12th subjects. These tests are also very effective and useful for those who preparing for competitive exams like NEET, JEE, CA etc. It can boost their preparation level and confidence level by attempting these chapter wise online tests.
These online tests are based on latest CBSE Class 12 syllabus. While attempting these our students can identify the weak lessons and continuously practice those lessons for attaining high marks. It also helps to revise the NCERT textbooks thoroughly.
CBSE Class 12 Chemistry – MCQ and Online Tests – Unit 15 – Polymers
Question 1.
Glycogen, anaturally occuring polymer stored in animals is a
(a) monosaccharide
(b) disaccharide
(c) trisaccharide
(d) polysaccharide
Answer
Answer: (d) polysaccharide
Question 2.
Dacron is an example of
(a) polyamides
(b) polypropenes
(c) polyacrylnitrfle
(d) polyesters
Answer
Answer: (d) polyesters
Question 3.
Nylon 6, 6 is obtained by condensation polymerisation of
(a) adipic acid and ethylene glycol
(b) adipic acid and hexamethylenediamine
(c) terephthalic acid and ethylene glycol
(d) adipic acid and phenol
Answer
Answer: (b) adipic acid and hexamethylenediamine
Question 4.
The correct structure of monomers of buna-S is
Answer
Answer: (c)
Question 5.
Terylerte is a condensation polymer of ethylene glycol and
(a) benzoic acid
(b) phthalic acid
(c) dimethyl terephthalate
(d) salicylic acid
Answer
Answer: (c) dimethyl terephthalate
Question 6.
Natural rubber is a polymer of
(a) 1, 1-dimethylbufadiene
(b) 2-methyl-1, 3-rbutadiene
(c) 2-chlorobuta-1, 3-diene
(d) 2-chlorobut-2-ene
Answer
Answer: (b) 2-methyl-1, 3rbutadiene
Question 7.
Composition of Ziegler-Natta catalyst is
(a) (Et3)3Al.TiCl2
(b) (Me)3Al.TiCl2
(c) (Et)3Al.TiCl4
(d) (Et)3Al.PtCl4
Answer
Answer: (c) (Et)3Al.TiCl4
Question 8.
Heating rubber with sulphur is known as
(a) galvanisation
(b) bessemerisation
(c) vulcanisation
(d) sulphonation
Answer
Answer: (c) vulcanisation
Question 9.
Which of the following is a condensation polymer?
(a) Teflon
(b) PVC
(c) Polyester
(d) Neoprene
Answer
Answer: (c) Polyester
Question 10.
Which of the following polymers does not involve cross-linkages?
(a) Vulcanised rubber
(b) Bakelite
(c) Melamine
(d) Teflon
Answer
Answer: (d) Teflon
Question 11.
Which of the following is not an example of addition polymer?
(a) Polythene
(b) Polystyrene
(c) Neoprene
(d) Nylon 6,6
Answer
Answer: (d) Nylon 6,6
Question 12.
Bakelite is an example of
(a) elastomer
(b) fibre
(c) thermoplastic
(d) thermosetting
Answer
Answer: (d) thermosetting
Question 13.
The S in buna-S refers to
(a) Sulphur
(b) Styrene
(c) Sodium
(d) Salicylate
Answer
Answer: (b) Styrene
Question 14.
Teflon and neoprene are the examples of
(a) copolymers
(b) monomers
(c) homopolymers
(d) condensation polymers
Answer
Answer: (c) homopolymers
Question 15.
The monomers used in addition polymerisation through free radical should be very pure because
(a) the traces of impurities act like inhibitors resulting in short chain polymers
(b) the impurities result in formation of different products
(c) the polymer formed is impure
(d) catalyst does not function in presence of impurities
Answer
Answer: (a) the traces of impurities act like inhibitors resulting in short chain polymers
Question 16.
Which among the following is a cross-linked polymer?
(a) Polyesters
(b) Glycogens
(c) Melamine-formaldehyde
(d) Polyvinyl chloride
Answer
Answer: (c) Melamine-formaldehyde
Question 17.
Which of the following polymers does not have vinylic monomer units?
(a) Acrilan
(b) Nylon
(c) Polystyrene
(d) Neoprene
Answer
Answer: (b) Nylon
Question 18.
Synthetic polymer prepared by using caprolactam is known as
(a) terylene
(b) teflon
(c) nylon 6
(d) neoprene
Answer
Answer: (c) nylon 6
Question 19.
Polymer which has amide linkage is
(a) nylon-6, 6
(b) terylene
(c) teflon
(d) bakelite
Answer
Answer: (a) nylon-6, 6
Question 20.
Which of the following are thermoplastic polymers?
(a) Polythene, urea-formaldehyde, polyvinyls
(b) Bakelite, polythene, polystyrene
(c) Polythene, polystyrene, polyvinyls
(d) Urea-formaldehyde, polystyrene, bakelite
Answer
Answer: (c) Polythene, polystyrene, polyvinyls
Question 21.
Which of the following sets contains only addition polymers?
(a) Polyethylene, polypropylene, terylene
(b) Polyethylene, PVC, acrilan
(c) Buna-S, nylon, polybutadiene
(d) Bakelite, PVC, polyethylene
Answer
Answer: (b) Polyethylene, PVC, acrilan
Question 22.
Which of the following is not an example of rubber?
(a) Polychloroprene
(b) Buna-N
(c) Butadiene-styrene copolymer
(d) Polyacrylonitrile
Answer
Answer: (d) Polyacrylonitrile
Question 23.
cis-Polyisoprene possesses elastic property because
(a) It is soft and soluble in non-polar solvent
(b) It is unsaturated and porous
(c) It has a coiled structure and chains held together by weak van der waals forces
(d) It has fibrous structure and reactive sites at various double bonds
Answer
Answer: (c) It has a coiled structure and chains held together by weak van der waals forces
Question 24.
Identify the type of polymer
(i) -A-A-A-A-A-A-
(ii) -A-B-B-A-A-A-B-A-
(a) (i) Homopolymer, (ii) Copolymer
(b) (i) Natural polymer, (ii) Synthetic polymer
(c) (i) Linear polymer, (ii) Branched polymer
(d) (i) Fibre, (ii) Elastomer
Answer
Answer: (a) (i) Homopolymer, (ii) Copolymer
Question 25.
Arrange the following polymers is an increasing order of intenqolecular forces: fibre, plastic, elastomer
(a) Elastomer < Fibre < Plastic
(b) Elastomer < Plastic < Fibre
(c) Plastic < Elastomer < Fibre
(d) Fibre < Elastomer < Plastic
Answer
Answer: (b) Elastomer < Plastic < Fibre
0 Comments:
Post a Comment